Heating/Cooling Club Membership

Preventative Maintenance

tuneup-repairIt’s about more than service… it’s about prevention. With typical service agreements, you pay money for priority service when there’s a problem. With a Service Legends Comprehensive Maintenance Agreement, you not only get priority service, you can prevent those problems from happening in the first place, and save money in the process!

You will receive our exclusive Red Carpet Service. We’ll strive to arrive on time and in a clean uniform! Plus, we’ll cover our shoes before we enter, lay down work mats to keep our work areas clean, and tidy up when we’re done. Then we’ll follow up to make sure everything was exactly as you expected.

After our skilled technicians spends approximately 2 hours bringing your furnace or air conditioner up to factory fresh condition:

  • You will be wiser knowing you are not wasting your hard earned dollars on extra utilities!
  • Your furnace or air conditioner will THANK YOU by not breaking down during extreme temperatures!
  • Your family will be safe and you will be confident that your HVAC system is not producing deadly carbon monoxide poisoning.

Club Membership services include:

  • Service Legends Trust Certified technicians (we do not use out-source contractors)
  • Priority service over non-Club Member customers
  • Technician Seal of SafetyFast response and 24-hour/7-day emergency service
  • Extended appointment times to better fit YOUR schedule
  • Maintain and validate manufacturer warranties
  • Reduce the risk of costly breakdowns
  • Increase efficiency and reduce energy costs
  • Maintain safe operation
  • Improve comfort and reliability
  • 20% Discount on heating and cooling repairs
  • Inflation protection
  • 10% Discount on heating & cooling equipment
  • 10% Discount on air quality accessories (air cleaners, humidifiers, duct cleaning and more)
  • 100% Credit of Diagnostic towards repair (Gold and Platinum Club Membership)
  • If we are unable to repair your system within 24 hours, we WILL provide temporary comfort with room units or we WILL put you in a hotel on us (Gold and Platinum)
  • Automatically warranties all parts for 24 months and labor for 24 months

The Service portion of your Club Membership comes with a Scheduled System Rejuvenation that consists of these individual operations:

  1. Infrared Camera Inspection of Heat Exchanger
  2. Test Blower Motor & Amp Draw
  3. Check A/C for Level
  4. Test Motor Start Capacitor
  5. Inspect A/C Lines for Restrictions
  6. Inspect Blower Motor
  7. Inspect Evaporator Coil
  8. Test Compressor Start Capacitor
  9. Inspect Breaker & Disconnect
  10. Inspect Contactor
  11. Test Freon Levels
  12. Test Compressor Amp Draw
  13. Test All Wiring Connections
  14. Measure & Test Temperature Drop
  15. Check Filter
  16. Clean Condenser Coil
  17. Test All Wiring Connections
  18. Measure & Test Temperature Rise
  19. Clean Blower Housing
  20. Inspect Coil for Mold Like Debris
  21. Inspect Condensate Drain
  22. Clean Debris Around Inside A/C
  23. Wax and Seal AC Unit
  24. Efficiency Performance Analysis
  25. Lubricate Motor
  26. Level & Clean Thermostat
  27. Add up to 2 lbs. Refrigerant
  28. Duct Inspection
  29. Test and Calibrate Freon Levels
  30. Clean Condensate Drain
  31. Test Static Pressure of System
  32. Clean Inside of Condenser Coil
  33. Check Carbon Monoxide Detector
  34. Duct Capacity Calculation
  35. Seal Plenum & Return Air Drop
  36. Vacuum & Clean Inside Return Drop
  37. Inspect Indoor Air Quality Products


“A 1/16th of an inch of dirt on a blower wheel can increase its energy consumption by 25%.”

dirty-filter“When the coil and filter on your furnace become plugged, it’s like running a marathon while breathing through a straw.”


“Dirty blower motors will fail prematurely, and may cause a $300-$700 furnace repair.”

  1. Infrared Camera Inspection of Heat Exchanger
  2. Test Blower Motor & Amp Draw
  3. Test Inducer Motor Amp Draw
  4. Test Start Capacitor
  5. Inspect Blower Wheel
  6. Inspect Evaporator Coil
  7. Test Flame Sensor
  8. Test for Proper Venting
  9. Test Ignition System
  10. Test for Gas Leaks
  11. Test All Wiring Connections
  12. Measure & Test Temperature Rise
  13. Check Filter
  14. Clean Burners
  15. Clean Furnace Cabinet
  16. Clean Motor Housing
  17. Check Belts
  18. Clean Flame Sensor
  19. Set & Calibrate Gas Pressures
  20. Clean Heat Exchanger
  21. Lubricate Motor
  22. Level & Clean Thermostat
  23. Change Thermocouple
  24. Duct Inspection
  25. Test & Calibrate Refrigerant Levels
  26. Clean Condensate Drain Line
  27. Test Static Pressure
  28. Clean Around Furnace
  29. Clean Top of Water Heater
  30. Check CO Detector
  31. Test Smoke Detector
  32. Dryer Vent Inspection
  33. Hot Water Heater Inspection
  34. Duct Capacity Calculation
  35. Seal Supply & Return Plenums
  36. Vacuum & Clean Return Plenum
  37. Inspect Indoor Air Quality Products

Have Questions?

Call us at 515-657-6634, 24 hours a day, 7 days a week,
or visit our FAQ page for helpful tips and common questions.