Geothermal Maintenance Basics
A geothermal heat pump is the most energy-efficient and environmentally clean air conditioning system available. It works by drawing the latent energy from the ground to both heat and cool your home year round. There are over one million homes currently running on geothermal, with the numbers increasing substantially every year. If you own a geothermal system, then you’re already aware that they require little in annual maintenance (as opposed to traditional HVAC systems). Most of the system, consisting of a series of pipes, is buried underground and should last three decades or more.
However, there are a few things that you can (and should) do to ensure that your system runs at maximum efficiency. There are also a few basic maintenance points that a technician will focus on during a scheduled tune-up session. We’ve provided the highlights to showcase how simple the system is to maintain – and to emphasize what owners should already know.
Change the Air Filter – Just like any central air system, it is important to change (or clean) the air filter according to the owner’s manual. This is one of the easiest procedures that you can do on your own – and one of the most essential. To ensure that your geothermal system enjoys an extended life, keep the air filter clean. If you ignore the filter for too long, dust and dirt can become imbedded inside the air coil, hurting the system.
Condensate Drain – In the warmer months, condensation can form on the coils of a geothermal system (much like an air conditioning unit). This condensation can pick up dirt as it flows, which can eventually build up over time and clog the condensate drain. You should check the drain at least once at the end of summer to make sure that the drain isn’t clogged with dirt.
If you experience any problems with your system, call a technician immediately.
Checking Coolant – Geothermal systems operate by sending coolant (or a water and coolant mixture) into the ground through a series of pipes, where they exchange heat; regulating your home’s temperature. The pipes of a geothermal system don’t normally require maintenance, but they can develop a leak. A technician will test the lines and coolant levels to make sure that there are no leaks in the system.
Underground Pipes – If a leak in the system is detected, it will have to be repaired immediately. A leak will compromise the system and could ultimately shorten the life span.
Coax Heat Exchanger – If you own an open loop system (sometimes referred to as “pump and dump”), the coax heat exchanger should be cleaned annually with a chemical flush.
The basic takeaway here is that geothermal heat pumps are simple to maintain and require very little upkeep. The advantages of the system are many, but like any comfort appliance, there are both pros and cons in choosing implementation. If you have any more questions or concerns about how a geothermal heat pump might work for you, give Service Legends a call today at 515-657-6634. We are experts on geothermal and can assist you with every aspect of installation and service.
Thank you for making Service Legends the #1 provider of residential heating and air conditioning in the Des Moines area. A live and friendly customer care representative is ready to take your call 24/7 at 515-COMFORT (515.266.3678).